spe - 12 - 8 - 135 /b /wy page 1 of 3 specification part no. : empcb.mmcxfst j. a. ht product name : mmcx (f) jack for edge pcb mount feature : mmcx (f) jack straight edge mount pcb jack frequency range: dc up to 6 ghz finish: gold leg length: 2.9 mm total length: 7.4 mm rohs compliant
spe - 12 - 8 - 135 /b /wy page 2 of 3 1. introduction the empcb.mmcxfstj.a .ht connector was designed to be mounted on a pcb edge . the edge mount configuration allows the c onnector to be easily slotted onto a pcb board ; the maximum thickness of pcb that the connector can be used with is 0.8m m. the con nector pin is directly soldered on to pads on the pcb . taoglas connectors are all rohs compliant. 2. specification electrical impedance 50? frequency range dc ~ 6 ghz working voltage max. 170 v rms dielectric withstanding voltage 500 vrms insula tion resistance 1 000m ohms mechanical connector dimension 7.4mm* ? 4.5 mm max. t hickness pcb acceptable 0.8 mm connector pin diameter 0.7 mm c onnector type mmcx (f) to pcb edge mounted environmental operating temperature - 45 c to +85 c rohs compliant
spe - 12 - 8 - 135 /b /wy page 3 of 3 3. connector drawing name material finish qty 1 body brass gold 1 2 insulator teflon white 1 3 female contact phosphor bronze gold 1 taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to spe cifications and product descriptions at any time without notice. taoglas reserves all rights to this document and the information contained herein. reproduction, use or disclosure to third p arties without express permission is strictly prohibited. copyright ? 2012, taoglas ltd.
|